110V High quality digital ultrasonic generator 1200W LED window show
Voltage:110-120V or 220-240VOutput power:1200wInput current:10AWork
frequency:40KhzWeigh : 7Kgs
Function and key description
1.Power switch: turn on or cut off input power; ON is ON and OFF is off. If
the switch is in ON position and the switch-in lamp is on, it indicates that
the input power is normal.
2.Power regulator potentiometer: small on the left and large on the right. The
power can be controlled by adjusting this potentiometer. This is optional, the
general dual-frequency model or the need for 485 communication model, power
regulation with adjustment and adjustment-key to complete. You don't need this
3.High-frequency output terminal: left is positive, right is negative, can not
be reversed. If connected, there may be leakage or no output.
4.PLC remote terminal: this terminal is optional, with two lines of output,
only when two lines of the terminal are short-circuited.
5.Power plug and power cord: connect to the power supply through the plug, and
supply power to the generator.
6.Fan: air cooling for the internal components of the generator. To ensure the
reliability of the components.
7.Product nameplate: representing the main electrical parameters of the
machine, frequency, power, input voltage three parameters, note that the use
conditions must be the same as the specification identified by this nameplate,
otherwise the generator will be damaged. As shown, the machine model is 1200W
40K with an input voltage of 180-265V.
8.F- / I key: display switch key; can be displayed in the current, frequency,
mode, address code four display interface switch; boot default display current.
9.Trigger / stop key: only valid in timing mode. Tap this key to stop the
timing while the machine is working, and then press this button to rework.
10.Adjust / adjust-key: on the model without adjusting knob, when the current
is displayed, the /-key can adjust the current size; when the address is
displayed, the address code value can be adjusted, and when the timing is
displayed, the timing time can be adjusted.
11.In mode display, three modes can be switched. That is, remote mode (divided
into remote on-on-PON, remote turn-on-POFF); mode) (ON); timing mode (TXX.X)
unit for minutes, three modes of entry methods are: remote: TIME and-key press
at the same time; Open: TIME and + keys are pressed at the same time; open: +
and-keys are pressed at the same time.
12.In remote mode: machine tail remote control line closed, enter remote open,
control line disconnected, enter remote closing.
Features of ultrasonic generator
1.Frequency tracking: in the range of positive and negative 1.5KHz frequency
deviation of the transducer, the generator can automatically adapt to the
frequency change of the transducer without adjusting the frequency.
2.Current stabilizing ring: The machine is equipped with a loop stabilizing
circuit, and the current can be stabilized within the positive and negative
0.1A of the specified parameter, whether under the load or the water
temperature and the supply voltage. it is critical for the quality stability of
the cleaning product.
3.The circuit is equipped with EMI circuit and uses phase-shift full-bridge
technology to adjust power, which can minimize the interference of the
generator to the outside world, compared with the traditional thyristor power
regulating circuit. The severe surge current generated by the thyristor circuit
when it is turned on around 90 and 270 degrees and the serious conduction and
radiation disturbance derived from it can be completely solved. The
interference to PLC and other electrical appliances is minimized.
Payment and Shipping
We are prefer paypal payment, it's fast safe and convenience, we appreciate
your prompt payment, and expect within 4 days if immediate payment is not
required on your purchase, unpaid item dispute will be reported to .We will
send item to the address you provided on ,if any requirements to the
shipment please tell us before send out ,Thanks a lot.
Customer Service Policy
If the product is damaged in shipment or is found to be defective, such as
missing parts, can not working correctly and other defective caused by our
You can ask for exchanging an item or refunding within 15 days from the time
you received the product. Shipping cost is non-refundable, buyer pays return
i) All refund product must be original.
ii) If exceeds the deadline stipulated, we will not given returns.
iii) If any request to the shipment,please tell us earlier,Thanks,
We strive our best to provide you the most reliable, affordable way of
shipping service. But sometimes international delivery is highly depended on
the courier company and local customs/duties. If you do not receive your item
on time, please contact us immediately for further assistance.
If you are satisfied with our products and service, please give us positive
If you are dissatisfied for our product and service, please tell us the
reason, before you leave negative or neutral feedback, give us the opportunity
to Improve, we will try our best to do it well.
Thank you for your understanding.