View more great items
Here at Future Build Supplies we have on offer:
KA Tanking Slurry 25kg in Grey
The Original & still the Best!
The KA Tanking Slurry waterproofing system provides a solution to water
leakage, ingress or seepage in concrete structures or any cementitious
substrate. The formation and development of insoluble crystals into water
bearing capillaries and fissures effectively blocks the further passage of
water and ensures permanent water tightness for the life of the structure. The
KA system is designed to function against water penetration in various
conditions. KA Tanking Slurry is supplied as a powder and when mixed with
water, is applied directly to concrete, blockwork masonry or cement renders in
areas where general waterproofing is required. KA tanking Slurry can be applied
to new or old structurally sound surfaces. It can be applied either to the
negative or the positive side and will negate dampness in ground water
permeation even under hydrostatic pressure.Colour: Grey
25kg waterproof tub
Coverage: 8m2 per tub based on two coats
KA Tanking Slurry can be used for the following applications. • Retaining
Walls and columns in reservoirs• Swimming Pools prior to tiling or painting
Stable Floors• Concrete drinking water tanks• Water Treatment and sewerage
plants• Foundation Slabs• Underground Cellars, basement car parks, garages, etc.
Pre-stressed and pre-cast concrete units• Tunnels, silos, irrigation channels
Bathrooms, kitchens, etc• Lift Shafts• Vehicle maintenance pits
Fillet Seal:Specially designed to cover points of stress found at floor & wall
junctions when tanking internal structures.
Can be used to form a solid fillet at floor/wall junction.
No complicated mixes.
Just add water and stir.SURFACE PREPARATION Where necessary remove all
plaster/render back to the stone substrate of area being waterproofed. All
loose, friable or crumbling substrate and any grease or oil must be removed.
Saturate substrate with clean water, leaving to soak overnight if possible.
Remove freestanding water. MIXING Add KA Fillet Seal powder to no more than 4
litres of clean water. DO NOT ADD WATER TO POWDER. Mix thoroughly until a
creamy, homogenous consistency is achieved. This can be done by hand, but a
slow speed mechanical mix will achieve better results. Allow to stand for 10
minutes and then remix to ensure chemicals have completely dispersed. If
necessary a modest amount of water may be added to improve consistency.
APPLICATION On completion of tanking all required surfaces, apply prepared KA
Fillet Seal to wall-wall/wallfloor joints at a thickness of approximately 25mm.
It is also also possible to use KA Fillet Seal after the first coat of KA
Tanking Slurry, before the second coat of KA Tanking Slurry has been applied,
therefore packing the fillet in. Smooth of the surface of the fillet using a
trowel. EMERGENCY PROCEDURES Skin/Eye Contact: Dust of spillage on skin and
wash well with soap and water. Wash eyes at once with cold, clean water for
10-15 minutes. Seek medical advice. Inhalation: Take care when handling to
minimise dust Ensure adequate ventilation. Call a doctor if air passage is
KA-Bond SBR Premium Bonding Agent PVA Bond 25L
1 x 25ltr container of KA-Bond 5ltr SBR, supplied by one of the UK's best
building chemicals suppliers, this is a premium grade SBR.
SBR is a water resistant PVA and can be used in many applications, it can be
used as an admixture for concreting which improves workability, durability and
will also reduce any shrinkage as well as many plastering and rendering uses.
However one of it's main usages and the reason why we stock and sell this is
it's excellent use as a base primer for surfaces prior to applying tanking
slurry for damp proofing surfaces. Simply mix the required amount of SBR with
water at a ratio of 2:1 and apply to the areas to be worked, allow a short time
for this to go 'tacky' and then apply your tanking for a complete protection
with the added bonus on extra adhesion. This premium grade has a massive 42%
solid content matching other and beating most similar but higher priced
products on the market.
A premium co-polymer bonding compound for adhesion and improving flexibility,
durability & waterproofing.
KA-Bond SBR is designed to be added to mortar, screeds or renders to provide
flexibility and durability along with a waterproof finish.
KA-Bond SBR can also be used prior to the application of renders, screeds or
slurries to provide a strong adhesive bond that will not re-emulsify
Please take a moment to check out my Ebay Shop and see what other Fantastic
deals you could benefit from!
Important Customer Notice
IMPORTANT WE ONLY DELIVER TO MAINLAND UK - POSTAGE QUOTED IS FOR STANDARD
Please Request a total from Seller to get a delivery charge if your delivery
address is in the following areas:Scottish postcodes AB and above, HS, IV, KA27
28, KW, PA20 & above, PH4 and above and ZE. OR Northern Ireland, Southern
Ireland, Scottish Isles, Channel Isles, All other isles off the mainland.
EXTRA CHARGES TO SOUTHERN IRELAND, NORTHERN IRELAND, CHANNEL ISLANDSIF YOU ARE
IN ONE OF THESE AREAS PLEASE MESSAGE US THROUGH EBAY.FAILURE TO DO SO WILL
RESULT IN YOUR ORDER BEING REFUNDED.
Additional charges are determined by location and weight and can be
SUBSTANTIAL for delivery to any of the areas listed.
Delivery: On most items we will deliver within 24 To 48 hours.Some larger
products may take 1 -3 working days.Second Class Post 3 -5 working daysThe
goods will normally arrive during a working day between 9am - 6pm.
Please Note: If you are not able to accept delivery, please leave a signed
note on your front door explaining to either the courier or the postman where
to leave in your absence. ie with a neighbour or back garden or somewhere
Please contact us if this is not possible.Please take this into consideration
AS YOU WILL BE CHARGED FOR A REDELIVERY
Delivery is Mon - Friday 9am - 6.00pm (this is an all day delivery)If you miss
the courier, they will re-attempt the following working day. If you miss the
second attempt the parcel will come back to us where you will be charged for
the courier charges.
If you change the delivery address once the parcel has been dispatch, a £5.95
fee will be charged.If a parcel gets returned back to us because you are not in
we get charged £15.00 from couriers to return item. You will be charged this.
Please be advised that the following charges may apply if you wish to return
your goods if no longer required or the wrong item ordered;Incorrect sized item
purchased (no longer required) = Small Item £8.00 / Large Items £20.00Change of
address once an order has been dispatched with the courier = £5.95In the case
that your item is shipped on a pallet due to its weight and size the charge is
50.00In these circumstances these charges would be levied from your original
purchase cost at the point of refund.Please note under the Distance Selling
Regulations, you have a 30 day cooling off period to inform us of your intent
to return for the above reasons for which you shall be liable for the return
Below are our terms and conditions.These terms and conditions form the basis
on which you can visit our website. Please read carefully and print a copy for
your records as they contain important information.
GENERAL TERMS AND CONDITIONS
GAll of our products come with the manufacturer's guarantee of 12 months. Some
products may have longer guarantees, please contact us if you should require
additional information.Your statutory rights as a customer are not affected.
Information & Accuracy:
We retain the right to make adjustments to the pricing on this site to take
account of any increase in our supplier’s prices, the imposition of any taxes
or duties. If the price is found to be incorrect a new price shall be submitted
to you and if this price is unacceptable then the contract shall be cancelled,
with a refund if applicable.
Future Build Supplies Ltd) do not disclose buyer s information to third
parties.Cookies are used on our site solely for the intention of completing
All prices shown are including the current rate of V.A.T at 20%, which will be
added to your order at checkout.
Should your required item not be in stock, we will back order it for you. We
will e-mail you with the proposed delivery date and should you rather not wait
for delivery, you will have the option to cancel your order or part of it. This
does not affect your statutory rights as a consumer.
Future Build Supplies Ltd reserves the right to defer the date of delivery or
to cancel the Contract or reduce the volume of the Goods ordered by you the
Buyer (without liability to you the Buyer) if it is prevented from or delayed
in the carrying on of its business due to circumstances beyond the reasonable
control of the Company including, without limitation, acts of God, governmental
actions, war or national emergency, acts of terrorism, protests, riot, civil
commotion, fire, explosion, flood, epidemic, lock-outs, strikes or other labour
disputes (whether or not relating to either partys workforce), or restraints or
delays affecting carriers or inability or delay in obtaining supplies of
adequate or suitable materials, provided that, if the event in question
continues for a continuous period in excess of 45 days, Future Build Supplies
Ltd shall be entitled to give notice in writing to you the buyer to terminate
FUTURE BUILD SUPPLIES LTD, ADVISE ALL OF OUR CUSTOMERS TO AWAIT FOR RECEIPT OF
YOUR GOODS, BEFORE ARRANGING TRADESMEN TO INSTALL THEM, AS SOMETIMES IN CERTAIN
CIRCUMSTANCES DELIVERY DATES NEED TO BE CHANGED AT THE LAST MINUTE AND FUTURE
BUILD SUPPLIES LTD, ACCEPT NO LIABILITY FOR THIS.
Opening hours are Monday to Friday 9am till 4pm
Closed Saturday & Sunday
ALL PRICES INCLUDE VAT!!!